Maintenance/repair topics soon to be discussed
Results 1 to 3 of 3
  1. #1
    Super ********* Bob MacGregor's Avatar
    Join Date
    Dec 2010
    Location
    Oakdale, CT
    Posts
    2,873
    Thanks
    360
    Thanked 2,226 Times in 1,099 Posts

    Cool Maintenance/repair topics soon to be discussed

    The bolts that hold the differential together and other transaxle situations.

    Shim Adjust clutch, EZ Adjust clutch.

    J, K, L, M, N (40)(44)(46) mower decks and RM38, RM44, RM48 mower decks.

  2. The Following 5 Users Say Thank You to Bob MacGregor For This Useful Post:

    bigman (06-27-2020),Capt. Dan (06-05-2020),Harry (05-14-2020),InTroubleAlltheTime (06-27-2020),Maine Willy (05-14-2020)

  3. Remove Advertisements
    CaseColtIngersoll.com
    Advertisements
     

  4. #2
    Super ********* Bob MacGregor's Avatar
    Join Date
    Dec 2010
    Location
    Oakdale, CT
    Posts
    2,873
    Thanks
    360
    Thanked 2,226 Times in 1,099 Posts
    Hi Troops,
    I have a members 1986 226 here for much TLC. Primary problem was contamination on the carb and fuel system. I'm not sure what the stuff was that was in the carb, but it was blocking fuel flow thru the high speed jet. This is a B43M Onan 16HP, unknown hours as the hour meter is inop and reads 4,483.3 hours! Looking over this engine, it is evident that it is a low time engine/tractor, good thing!
    This post will cover the fuel system related situations.
    Click image for larger version. 

Name:	P6230008 copy.jpeg 
Views:	18 
Size:	62.5 KB 
ID:	115179Click image for larger version. 

Name:	P6230009.jpeg 
Views:	17 
Size:	63.3 KB 
ID:	115181Click image for larger version. 

Name:	P6240011.jpeg 
Views:	17 
Size:	61.2 KB 
ID:	115183Click image for larger version. 

Name:	P6240014.jpeg 
Views:	17 
Size:	65.8 KB 
ID:	115185Click image for larger version. 

Name:	P6240015.jpeg 
Views:	17 
Size:	85.1 KB 
ID:	115187Click image for larger version. 

Name:	P6240018.jpeg 
Views:	17 
Size:	71.3 KB 
ID:	115189Click image for larger version. 

Name:	IMG_0161.jpg 
Views:	17 
Size:	51.8 KB 
ID:	115191Click image for larger version. 

Name:	P6230005.jpeg 
Views:	17 
Size:	71.7 KB 
ID:	115193Click image for larger version. 

Name:	P6230001.jpeg 
Views:	16 
Size:	71.3 KB 
ID:	115195Click image for larger version. 

Name:	P6230002.jpeg 
Views:	16 
Size:	70.3 KB 
ID:	115197Click image for larger version. 

Name:	P6230004.jpeg 
Views:	16 
Size:	74.1 KB 
ID:	115199Click image for larger version. 

Name:	P6270001.jpeg 
Views:	13 
Size:	68.4 KB 
ID:	115225
    Last edited by Bob MacGregor; 06-27-2020 at 04:30 PM.

  5. The Following 5 Users Say Thank You to Bob MacGregor For This Useful Post:

    bigman (06-27-2020),CobyDog$10 (06-29-2020),Gordy (06-27-2020),Lionel (06-27-2020),tss8690 (06-27-2020)

  6. #3
    Super ********* Bob MacGregor's Avatar
    Join Date
    Dec 2010
    Location
    Oakdale, CT
    Posts
    2,873
    Thanks
    360
    Thanked 2,226 Times in 1,099 Posts
    Pics of pulse hose on a B43M, B48M with Nikki carb and blower housing mounted fuel pump. On Onan powered 226, 446 and 448, the fuel line goes thru the hole in the crossmember by the fuel tank, passes over and behind the travel control valve and forward in the left hand side frame channel, by the lift cylinder and out to the fuel pump. I leave some extra length to allow for moving the fuel tank to access the fitting. About 8' of 1/4" fuel hose is needed to replace the fuel line from tank to filter, from filter to fuel pump and fuel pump to carb. The fuel pump to carb line needs to have a large turn in it so it won't contact the engine governor lever.
    Click image for larger version. 

Name:	P6230005.jpeg 
Views:	15 
Size:	71.7 KB 
ID:	115231
    Click image for larger version. 

Name:	P6270001.jpeg 
Views:	14 
Size:	68.4 KB 
ID:	115227Click image for larger version. 

Name:	P6270002.jpeg 
Views:	13 
Size:	79.4 KB 
ID:	115229

  7. The Following 5 Users Say Thank You to Bob MacGregor For This Useful Post:

    bigman (06-27-2020),CobyDog$10 (06-29-2020),Gordy (06-27-2020),Lionel (06-27-2020),nlt6mor (06-28-2020)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •