The carb on my 444 seems to work well but the issue is the three small screws that hold the cover plate on appear to have been RIPPED out. I canít think of a good way to fix. I would have to tap several sizes larger. Not sure there is even enough material for this. Any ideas?
If not I was going to get eBay one but donít want to get one with the choke on wrong. Anyone have a link to the correct eBay carb for kohler Case?
I can't give a specific link but this is how I go about it. With your carb in hand (or near by), type "Kohler K341 carb" into Ebay. Compare the pictures carefully with your carb to make sure it is set up correct. Also, make SURE you get one with adjustable high and low speed jets. These old engines need to be tunable.